Glidecam Smooth Shooter (Arm and Vest)
The Glidecam Smooth Shooter is the world’s most sophisticated and affordable body mounted Camera Stabilization System designed for Cameras weighing up to 6 pounds when used with Glidecam 2000 Pro or HD-2000, or for Cameras weighing from 1.8 to 4.5 kg (4 to 10 lbs) when used with Glidecam 4000 Pro or HD-4000. The Smooth Shooter will allow you to walk, run, go up and down stairs, shoot from moving vehicles and travel over uneven terrain without any camera instability or shake.
The Smooth Shooter works by isolating your body’s motion from your camera, while your camera is balanced in a relatively motionless and isolated state. The Smooth Shooter’s Support Arm can be boomed up and down, as well as pivoted in and out, and side-to-side. It is the combined booming and pivoting action of the Support Arm, which isolates your motions from the camera in a way that creates smooth camera footage.
The Glidecam Shooter does not include a Glidecam 2000 or 4000 Pro or HD-series stabilizer; however, it is specifically designed to be used with them. If you already own one of our hand-held stabilizers, then you will be able to use it by simply attaching it to the end of the Smooth Shooter’s Support Arm. Neither the Glidecam 2000 Pro/HD, nor the 4000 Pro/HD stabilizers need to be modified to work with the Glidecam Smooth. You can use your camcorder’s flip out LCD monitor, or a monitor that is attached to the base of your Glidecam 2000 or 4000 Pro or HD series. This allows for remote viewing of the camera’s image without disturbing the orientation.
When using the Glidecam 2000 Pro/HD or Glidecam 4000 Pro/HD in hand-held mode, it is your arm that carries all of the weight. However, when the 2000 Pro or 4000 Pro are used with the Smooth Shooter, it is the Smooth Shooter’s Spring-loaded Support Arm that carries all of the weight. Because of this, you will now be able to shoot for extended periods of time, whereas before, the stress associated with hand-holding the weight reduced your shooting time.
The Smooth Shooter is not just an affordable replacement for the Glidecam V-8; it is a highly developed and meticulously engineered camera stabilizer. Its ability to shoot smooth imagery within its weight range is extraordinary. It outperforms all the competitions in its class, yet remains truly economical. The Smooth Shooter is the realization of the need to stabilize lightweight cameras using the same degree of sophistication employed to stabilize heavy cameras. With the Glidecam Smooth Shooter you will be able to acquire the type of smooth footage you’ve always dreamed of.
Spring-loaded Support Arm
The Smooth Shooter’s Dyna-Elastic™ Support Arm incorporates more than twenty precision radial bearings within its machined T6 aluminum structure. The placement and implementation of these double-shielded bearings produce minimal friction and allow the Dyna-Elastic™ Support Arm to pivot and boom very smoothly, and with virtually no noise.
Two high-carbon alloy, Extension Springs are employed within the Support Arm’s hardcoat anodized Exo-Skeletal Shell. Utilizing Class Three Levers, the energy of the Extension Springs acts upon internal Fulcrum Points, and provides the Support Arm with its lifting power. The spring tension is field adjustable and allows for varying camera weights.
Our proprietary spring Inter-X-Change™ system makes the installation and removal of the springs quick and easy. The Support Arm can be setup and used in either a One-Spring Mode, or a Two-Spring Mode. In the One-Spring Mode, the Support Arm can hold a total combined camera and hand-held stabilizer weight of 9 pounds. In the Two-Spring Mode, the Support Arm can hold a total combined camera and hand-held stabilizer weight of 18 pounds.
A key design feature of the Support Arm is that it incorporates our Light-Force™ technology. This literally means that only a „light“ force or effort is required by the operator to hold the arm at any given position, or to boom the arm up and down. It is this Light-Force™ feature that provides the operator with the optimum amount of camera buoyancy or float.
Smooth Shooter Support Vest
The Smooth Shooter Support Vest is lightweight and comfortable can be adjusted to fit a wide range of operators. The Support Arm can be setup and configured so either a left-handed, or a right-handed operator can use the system.
High endurance, dual density, EVA foam padding and integral T6 aluminum alloy create a vest which can hold and evenly distribute the weight of the system across the operator’s shoulders, back, and hips. Made with 1000 denier cordura fabric, and 7-panel seat belt strapping. For safety, quick release high impact buckles allow the vest to be removed quickly.
• (Glidecam HD-1000)
• Glidecam HD-2000
• Glidecam HD-4000
• Glidecam 2000 Pro
• Glidecam 4000 Pro